Surrey based contractor Accord Air Systems Ltd proposed installing a wall mounted split system for an office in Herne Hill. However permission was not granted by a neighbour who needed to provide the wall space to hang the system’s condensing unit. Ring any bells?
The Air Conditioning Agency provided the ideal solution by selecting a UNICO Smart 12SF to be installed at
low level under the office’s fascia, and an order was placed. Using the installation instructions for guidance, a 200mm dry diamond core bit was used to cut 2 holes from outside in.
Two ducts and grilles are provided FOC. One duct is to bring air in to the system. The other is to reject the hot air. When the ducts are in place, all that can be seen externally is smart, discreet and stylish. Note: A further hole may be required for condensate removal, depending on model.
After the holes are drilled, its simply a case of screwing the included mounting plate to the wall, hanging the UNICO on it, and then connecting the unit to a standard 220/240 volt 13amp electrical supply.